 |  | 
|
|  | |
160-Piece Trim Screw Assortment
Black Oxide |
|
| The assortment consists of trim screws and washers in sizes commonly used on Porsches. The sturdy storage case contains 110 black Phillips Oval Head trim screws in 3.5mm (#6), 4.2mm (#8) and 4.8mm (#10) diameters and ranging in length from 13mm (1/2 In.) to 32mm (1 1/14 In.), and 50 black zinc over brass (no rusting) flanged trim washers in #6 and #8 diameters. This assortment can be used for interior as well as exterior trim. |
|
| | |  | |
| Window Frame Screws - Black Zinc |
|
| These metric oval head Phillips screws hold the top of the driver and passenger doors window/deflector divider frame upgrights on 911s and some other Porsche models. Better countersunk fit than the original ones. 2 screws per door. Black zinc finish, size M5 x 9.5mm (measured at the top of the countersunk, otherwise the length of the screw shaft is 7mm). A small detail but a contribution nonetheless to the overall appearance of your car. Takes 2 minutes and a Philipps screw driver. The screws come in packs of 4. |
|
| | |  | |
| 911 Door Pocket Bottom Screws - Black Zinc |
|
| These metric flat head Phillips screws hold the bottom part of the door pocket on the driver and passenger doors on 911s. 3 screws per door. Black zinc finish, size M4 x 25mm (measured at the top of the countersunk, otherwise the length of the screw shaft is 21mm). The screws come in packs of 3. |
|
| |
|
