 |
 | |
|
Carrera 997/997S EVO V-FLOW Air Induction Kit |
| HP Gain 10-12HP. Evo's new "Internal Venturi Technology" fresh air induction systems are made specifically for the 3.6L/3.8L engines. The EVO system delivers more power and torque while completely isolating the air filter from the engine for a denser intake charge. Power is increased by about 10 - 12 wheel HP/TQ. Engineered utilizing state of the art CAD CAM 3D modeling, CNC machining, computer controlled Superflow air flow testing, rotational molding, injection molding and countless man hours, these systems represent the apex of air induction technologies. All EVO systems install in the factory location and utilize the OEM ram air fresh air ducts for lower air intake temperatures and added power. Additionally, EVO systems also incorporate a custom cotton air filter and a 6 injection molded Venturi that acts as a vacuum for cold-air. All these components work together to create the most powerful Porsche air intake systems on the market today.
This intake is being utilized by almost every Porsche 997 participating in the Grand AM Cup GS series due to its consistent and reliable power gains. These race teams require real results and rely on the benefits of our intake system for their race cars. Note: These kits are now shipping with a new Evo filter, replacing the K&N which caused some fouling of the air sensor. And, you now have the option of ordering the filter either oiled or dry, select the option below.
Fits 2005> Carrera (997) and Carrera S / C4S |
|
|
|
 | | Porsche Carrera 997 Factory Short Shift Kit
This short-throw mechanism (complete shifter replacement, see pictures below) offers a reduction in gear-lever travel of approximately 35%. Precision engineered for accurate selection, the result is a more dynamic driving experience. Available for all 997 models 2005-on. It can also be combined with all aluminium, wood and carbon trim options currently available from Porsche Tequipment. Note: some slight resistance during gearshifts may be experienced when the vehicle is started from cold. Shift knob and boot not included.
|
|
|
 | | Factory 996/997 Short Shift installation pics - Click to enlarge.
|
|
|
 | | Fabspeed 997 Maxflo Performance Mufflers
Simple bolt-on installation- reuses factory 997 tips.
Systems comes with instructions- ready to install.
Complies with factory Porsche warranty
Complies with emissions all 50 states including California
Saves 28lbs from the rear of your 997 and Increases 10-14HP
Available with or without tips. Please selct below. Tips add $549Note: Shipping cost in the continental US is $45. Adjustment to invoice made when order is processed. Other locations, please email for shipping quote.
Listen to the difference in sound of the 997 Maxflo Muffler System from the Factory Muffler:
Factory Sound
Fabspeed Sound
PRODUCT VIDEO: 996 & GT3 & 997 Muffler Exhaust Explanation Video
PRODUCT VIDEO: 997 Maxflo Muffler
Click Here for 997 Maxflo Muffler vs Stock Dyno Result
|
|
|
 | | Fabspeed 997 & 997 "S" Sport Headers
Fits all 997 Vehicles 2005+
Fabspeed Motorsports headers offer these benefits:
997 Headers will give a 15HP Gain & 12ft Lbs of Torque
Equal length header pipes for better torque and equalized engine pulsing. One pice C.N.C. mandrel bent primary pipes/tubes for maximum uninterrupted exhaust flowIndustry 1st and exclusive to Fabspeed Motorsports.
Slightly larger primary pipes for better exhaust flow, less backpressure.
Triangular/pyramidal F1 high velocity merge collectors for maximum exhaust scavenging and volumetric efficiency.
Stock 997 collectors are stamped and designed for inexpensive hi volume production.
More power & torque across the RPM band while complying with emissions.
Simple and easy direct bolt-on installation.
Copper gaskets included.
|
|
|
 | | 997 Copper Header Gasket Set
Copper gaskets as used in Formula 1 and Indy Car racing for ultimate leak proof sealing from the headers to cylinder heads, and from the catalytic converters to the headers. These gaskets provide much better seating.
4 pieces included in set.
|
|
|
 | | Fabspeed 997 & 997 "S" Cold Air Kit
This Fabspeed Motorsport COLD AIR upgrade kit is a do it your self kit that will increase airflow by 20% to all the new 2005+ Porsche 997 cars.
Simple to install under 20 minutes with Torx screwdriver.
997 Cold Air Kit gives 12HP & better throttle reponse
20% more COLD AIR airflow from outside the engine compartment. More airflow = more power.
Complies with Porsche factory warranty
Simple direct replacement BOLT-ON upgrade for all 997 stock airboxes
Works with factory Porsche and BEST with optional BMC F1 air filters. Only $120 when ordered with this cold air intake. Save $30!! Select below.
Much better throttle response you can feel
Absolutely more Sports Car sound that you can hear. Fabspeed Motorsports 997 "COLD AIR Upgrade/enhancement kit" makes all stock 997 cars with stock mufflers/ no modifications sound as if you upgraded your 997 to a mild performance exhaust.
PRODUCT VIDEO: 997 Cold Air Kit
|
|
|
 | | Schnell 997 Muffler Tips Dual Round Stainless Steel
Fits all 997 C2and C4 2005 on
|
|
|
 | | Porsche Factory Chrome Exhaust Tips - Carrera
Oblong-shaped chrome-plated stainless steel tailpipes add a sporty visual flair. The simple design fills the twin exhaust cut-outs to integrate harmoniously with the rest of the car. Fitment: Carrera 3.6 liter 2005 or newer, C2 or C4. Will not fit a Carrera S or Carrera 4S, or cars equipped with factory Sport Exhaust.
|
|
|
 | | FABSPEED 997 Dual Round QUAD Muffler Tips
Fits All 997 Products 2005+
Fits both 997 "S" and 997 cars please specify 997 model. If you are ORDERING a Fabspeed 997 MAXFLO exhaust and WANT quad tips but have a regular 997 please specify 997 S maxflo for maximum power.
These Dual Quad round style tips look amazing and are made from high quality T 304 stainless steel. The tips are mirror polished to a show car shine.
Simple and easy bolt-on for all 997 and 997 S cars.
997 or 997 S when ordering.
|
|
|
 | | Folding Race Hook - Screw Type
New folding race hooks install in minutes on any Porsche with factory screw type removable tow hooks. These pulls have a 2" opening as required by most organized race events and screw directly into the factory bumper pull location. Constructed from stainless steel and come with a rubber bumper on the back side to insure your bumper cover will never get scratched from hook contact. Keep the corner workers and track officials happy by installing a set of hooks that are both highly visible and highly functional.
Fits the front of 964/993/996/997/Boxster/Cayman/944T/968 and the rear of 964/993 /964/993/996/997
|
|